Replacement Screens for Model 48-30 and Model 2000 For Drilling Solids Removal

Replacement Screens for Model 48-30 and Model 2000 For Drilling Solids Removal

1.Description:

Hookstrip metalback screen approximately 41-3/8'' from outside of hook to outside of hook and 27-1/2'' in the direction of flow.

Our tight hook dimensions allow the use of our standard "C" shaped hook to be used on the Model 2000 in addition to the model 48-30 for which it was orginally designed.

The layers of cloth could be 2 or 3. There are HP, DX and DF series screen.

The mesh size are from API 20 to API 325. Cut point from 40.3 to 783.8 microns.

The 48×30 screens are hook strip type and clamped in a tensioning way.

Compared to Flat 48×30 screen the Waved screen holding much more filtration area and higher efficiency during drilling solids removal.

Screens are packed 2 to a box. 20 pcs screens could be packed to one wooden case. The size of one wooden case will be about 1150*780*650mm.

2.Applications:

48×30 shaker screens are used on FLC2000 series shaker. FLC short for Flo line cleaner. FLC2000 series shaker including 3 panel and 4 panel ones, as well as the mud cleaners.

3. Specifications:

4. Feature Advantage

Different layers with different density. To arrange these layers reasonably and exactly, the screening effect will become more and better. 

The waved cloth bonded to metal backing plate, has more surface . The effective area of a waved screen obtain 125%to 150% of a flat screen so that waved screen can load more drilling fluid flow.

5. Competitive Advantage

• Corrosion-resisting, heat-resisting, wear-resisting
• long working life, higher flow rate
• easy disassembly, rating of temperature, good performance
• conductivity (powder) liquid, trapping (dreg) effect is good
• current design, technical expertise
• API compliant shaker screens

6. Detail Pictures